Announcement

Collapse

Fandango at Home Forum Guidelines

Fandango at Home Forum Guidelines

The Fandango at Home Forums are designed to help viewers get the most out of their Fandango at Home experience. Here, Fandango at Home customers may post information, questions, ideas, etc. on the subject of Fandango at Home and Fandango at Home -related issues (home theater, entertainment, etc). Although the primary purpose of these forums is to help Fandango at Home customers with questions and/or problems with their Fandango at Home service, there are also off-topic areas available within the Fandango at Home Forums for users to chat with like-minded people, subject to the limitations below.

Please post all comments in English. When posting a comment in the Fandango at Home Forums, please conduct yourself in a respectful and civil manner. While we respect that you may feel strongly about an issue, please leave room for discussion.

Fandango at Home Forum Guidelines

The Fandango at Home Forums are designed to help viewers get the most out of their Fandango at Home experience. Here, Fandango at Home customers may post information, questions, ideas, etc. on the subject of Fandango at Home and Fandango at Home -related issues (home theater, entertainment, etc). Although the primary purpose of these forums is to help Fandango at Home customers with questions and/or problems with their Fandango at Home service, there are also off-topic areas available within the Fandango at Home Forums for users to chat with like-minded people, subject to the limitations below.

Please post all comments in English. When posting a comment in the Fandango at Home Forums, please conduct yourself in a respectful and civil manner. While we respect that you may feel strongly about an issue, please leave room for discussion.

Fandango at Home reserves the right to refrain from posting and/or to remove user comments, including comments that contain any of the following:

1. Obscenities, defamatory language, discriminatory language, or other language not suitable for a public forum
2. Email addresses, phone numbers, links to websites, physical addresses or other forms of contact information
3. "Spam" content, references to other products, advertisements, or other offers
4. Spiteful or inflammatory comments about other users or their comments
5. Comments that may potentially violate the DMCA or any other applicable laws
6. Comments that discuss ways to manipulate Fandango at Home products/services, including, but not limited to, reverse engineering, video extraction, and file conversion.

Additionally, please keep in mind that although Fandango at Home retains the right to monitor, edit, and/or remove posts within Fandango at Home Forums, it does not necessarily review every comment. Accordingly, specific questions about Fandango at Home products and services should be directed to Fandango at Home customer service representatives.

Terms of Use - User Comments, Feedback, Reviews, Submissions

For all reviews, comments, feedback, postcards, suggestions, ideas, and other submissions disclosed, submitted or offered to Fandango at Home, on or through this Site, by e-mail or telephone, or otherwise disclosed, submitted or offered in connection you use of this Site (collectively, the "Comments") you grant Fandango at Home a royalty-free, irrevocable, transferable right and license to use the Comments however Fandango at Home desires, including, without limitation, to copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell and /or distribute such Comments and/or incorporate such Comments into any form, medium or technology throughout the world.
Fandango at Home will be entitled to use, reproduce, disclose, modify, adapt, create derivative works from, publish, display and distribute any Comments you submit for any purpose whatsoever, without restriction and without compensating you in any way. Fandango at Home is and shall be under no obligation (1) to maintain any Comments in confidence; (2) to pay to users any compensation for any Comments; or (3) to respond to any user Comments. You agree that any Comments submitted by you to the Site will not violate the terms in this Terms of Use or any right of any third party, including without limitation, copyright, trademark, privacy or other personal or proprietary right(s), and will not cause injury to any person or entity. You further agree that no Comments submitted by you to this Site will be or contain libelous or otherwise unlawful, threatening, abusive or obscene material, or contain software viruses, political campaigning, commercial solicitation, chain letters, mass mailings or any form of "spam."

You grant Fandango at Home the right to use the name that you submit in connection with any Comments. You agree not to use a false email address, impersonate any person or entity, otherwise mislead as to the origin of any Comments you submit. You are, and shall remain, solely responsible for the content of any Comments you make and you agree to indemnify Fandango at Home for all claims resulting from any Comments you submit. Fandango at Home takes no responsibility and assumes no liability for any Comments submitted by you or any third-party reserves the right to refrain from posting and/or to remove user comments, including comments that contain any of the following:

1. Obscenities, defamatory language, discriminatory language, or other language not suitable for a public forum
2. Email addresses, phone numbers, links to websites, physical addresses or other forms of contact information
3. "Spam" content, references to other products, advertisements, or other offers
4. Spiteful or inflammatory comments about other users or their comments
5. Comments that may potentially violate the DMCA or any other applicable laws
6. Comments that discuss ways to manipulate Fandango at Home products/services, including, but not limited to, reverse engineering, video extraction, and file conversion.

Additionally, please keep in mind that although Fandango at Home retains the right to monitor, edit, and/or remove posts within Fandango at Home Forums, it does not necessarily review every comment. Accordingly, specific questions about Fandango at Home products and services should be directed to Fandango at Home customer service representatives.

Terms of Use - User Comments, Feedback, Reviews, Submissions

For all reviews, comments, feedback, postcards, suggestions, ideas, and other submissions disclosed, submitted or offered to Fandango at Home, on or through this Site, by e-mail or telephone, or otherwise disclosed, submitted or offered in connection you use of this Site (collectively, the "Comments") you grant Fandango at Home a royalty-free, irrevocable, transferable right and license to use the Comments however Fandango at Home desires, including, without limitation, to copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell and /or distribute such Comments and/or incorporate such Comments into any form, medium or technology throughout the world.
Fandango at Home will be entitled to use, reproduce, disclose, modify, adapt, create derivative works from, publish, display and distribute any Comments you submit for any purpose whatsoever, without restriction and without compensating you in any way. Fandango at Home is and shall be under no obligation (1) to maintain any Comments in confidence; (2) to pay to users any compensation for any Comments; or (3) to respond to any user Comments. You agree that any Comments submitted by you to the Site will not violate the terms in this Terms of Use or any right of any third party, including without limitation, copyright, trademark, privacy or other personal or proprietary right(s), and will not cause injury to any person or entity. You further agree that no Comments submitted by you to this Site will be or contain libelous or otherwise unlawful, threatening, abusive or obscene material, or contain software viruses, political campaigning, commercial solicitation, chain letters, mass mailings or any form of "spam."

You grant Fandango at Home the right to use the name that you submit in connection with any Comments. You agree not to use a false email address, impersonate any person or entity, otherwise mislead as to the origin of any Comments you submit. You are, and shall remain, solely responsible for the content of any Comments you make and you agree to indemnify Fandango at Home for all claims resulting from any Comments you submit. Fandango at Home takes no responsibility and assumes no liability for any Comments submitted by you or any third-party.
See more
See less

IR support

Collapse
X
Collapse
 
  • Page of 11
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 7 8 9 10 11 template Next
  • Hagen
    replied
    Re: IR support

    Here is the pronto configuration file for the TSU 9400. It includes IR and netremote support for the VUDU box.

    Hagen.

    Leave a comment:

  • Hagen
    replied
    Re: IR support

    I have an updated xcf file for the pronto tsu9400 with support for netremote and IR. I'll get that out here shortly...

    It should work for the 9600 as well.

    Hagen.

    Leave a comment:

  • jleavens
    replied
    Re: IR support

    PS - The IR support for the Vudu rocks. I've got my Harmony 890 programmed now and the "cobra" is now in the drawer. Thank you engineering for the Page Up/Down commands!

    What I'd really like to see next are remote commands that go directly to areas like "My Movies", "Find Movies", etc.

    Leave a comment:

  • jleavens
    replied
    Re: IR support

    Originally posted by RonV View Post
    Robert,

    Not all URC remotes have the JP1 connector and if you do put one it it may not have the URC chip in it for programming. A lot of folks about two years ago started to complain about this on the boards.

    I learned my lesson when I had one of their moderately expensive remotes and it didn't have codes for one of my devices. I ordered a kit and thought I was in heaven with the software. Then it came time to download it after I re-assembled the remote and no sync with the computer. After a couple of messages on the board they said that my model didn't have the darn interface chip in it. Well there went 90 bucks for a remote and 35 dollars in hardware to program it.
    The last universal remote I bought didn't have codes for my DirecTV HD DVR and I started to get ****y on the phone wth them when they told me that. Then the rep said "put the remote up to the phone" and I'll be damned if they didn't send the codes acoustically over the phone.

    I was impressed.

    Leave a comment:

  • NA9D
    replied
    Re: IR support

    The Pronto codes are now in the original message of this sticky.

    Leave a comment:

  • RonV
    replied
    Re: IR support

    Originally posted by RobertHodge View Post
    Much to my amazement, I pulled the batteries on my MX-500 and there is indeed a 4 pin connector there (1 pin is blank).

    So are you saying that if I had the correct cable I could program my remote from my computer?
    Robert,

    Not all URC remotes have the JP1 connector and if you do put one it it may not have the URC chip in it for programming. A lot of folks about two years ago started to complain about this on the boards.

    I learned my lesson when I had one of their moderately expensive remotes and it didn't have codes for one of my devices. I ordered a kit and thought I was in heaven with the software. Then it came time to download it after I re-assembled the remote and no sync with the computer. After a couple of messages on the board they said that my model didn't have the darn interface chip in it. Well there went 90 bucks for a remote and 35 dollars in hardware to program it.

    Leave a comment:

  • RobD20
    replied
    Re: IR support

    I made a ccf of the codes. Not sure how to post it here. If you want it, please send me a pm.

    Leave a comment:

  • RobD20
    replied
    Re: IR support

    I received the Pronto xcf file from Vudu Support. My older Pronto uses ccf files. I loaded the Pronto software for their newer remotes and opened the xcf file and extracted the codes. Since I haven't received my ir dongle yet, I have no way of testing them.

    Power On
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0042 0017 070E 0167 005A 0017 0042 0017 0EBF
    Power Off
    0000 0068 0022 0003 0168 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 070E 0168 005A 0017 0042 0017 0EBF
    Skip Backward
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 06B5 0167 005A 0017 0042 0017 0EBF
    Skip Forward
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 06B5 0167 005A 0017 0042 0017 0EBF
    play
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 06B5 0167 005A 0017 0042 0017 0EBF
    pause
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 06B5 0167 005A 0017 0042 0017 0EBF
    back
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 070E 0167 005A 0017 0042 0017 0EBF
    page up
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 070E 0167 005A 0017 0042 0017 0EBF
    page down
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 070E 0167 005A 0017 0042 0017 0EBF
    VUDU Home
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0042 0017 0042 0017 0042 0017 06B5 0167 005A 0017 0042 0017 0EBF
    More Info
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 06B5 0167 005A 0017 0042 0017 0EBF
    Direction Up
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 06B5 0167 005A 0017 0042 0017 0EBF
    Direction Down
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0042 0017 06B5 0167 005A 0017 0042 0017 0EBF
    Direction Left
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 06B5 0167 005A 0017 0042 0017 0EBF
    Direction Right
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0042 0017 06B5 0167 005A 0017 0042 0017 0EBF
    Select
    0000 0068 0022 0003 0167 00B4 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0042 0017 0042 0017 0016 0017 0042 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 0016 0017 0016 0017 0016 0017 0042 0017 0016 0017 06B5 0167 005A 0017 0042 0017 0EBF

    Leave a comment:

  • kmulder
    replied
    Re: IR support

    Originally posted by NA9D View Post
    Your remote most certainly should be compatible. I know there were testers with Prontos.
    Great!
    Can't wait for it to arrive.

    Ken


    Visit the 5 Star Cinema

    Leave a comment:

  • NA9D
    replied
    Re: IR support

    Originally posted by kmulder View Post
    When you get the IR dongle will it come with the CCF or XCF file so you can import it into the remote?
    I'm not sure what it will come with. We'll have to get customer support involved. That said, when we were sent the information for testing, we did get sent an XCF file I believe. I know there as a file with the needed things for the Pronto.

    We'll try to get customer support to put up a FAQ on the IR programming and how it gets set up.

    Your remote most certainly should be compatible. I know there were testers with Prontos.

    Leave a comment:

  • Nded
    replied
    Re: IR support

    I love that Pronto 9600 because it illustrates the beauty of a free and open market place. Some folks embrace it fully, others think you must be nuts to spend more on a remote than they are willing to spend on their TV monitor. Just like the Vudu doesn't have to be the movie delivery service for all viewers, the Pronto doesn't have to be the right remote controller for all users. As long as you build a good enough product to command a large enough user group, it doesn't matter what others think.

    Leave a comment:

  • kmulder
    replied
    Re: IR support

    I am using the Pronto 9600 remote.


    When you get the IR dongle will it come with the CCF or XCF file so you can import it into the remote?
    I do not find any files on the pronto website.
    With the pronto remotes you download files into the Pronto edit software and incorporate the codes into the remote that way.
    My remote also can handle the TCP protocol but I am not that good at java script and have not been able to get it to work that way.
    I ordered the IR dongle and hope it is compatible with my remote.
    The Vudu website only says compatible with pronto remotes.
    They do not go into specific model numbers. I hope to be able to use the scroll dial on this remote with the IR codes.

    Ken


    Visit the 5 Star Cinema

    Leave a comment:

  • NA9D
    replied
    Re: IR support

    Originally posted by Guk35 View Post
    Download from? I updated my URC software but did not see the vudu listed.

    Thanks
    Walt
    It should be in the most recent code updates for any of the remotes. For the Logitech Harmony series, the Vudu is under Digital Set Top Boxes. I would look in there as well if you have that sort of thing with your remote.

    I would expect to see some help files from Vudu pretty soon on setup. Call customer service in the mean time...

    Leave a comment:

  • Guk35
    replied
    Re: IR support

    Originally posted by Nded View Post
    The remotes listed in the OP have the Vudu IR codes available for download.
    Download from? I updated my URC software but did not see the vudu listed.

    Thanks
    Walt

    Leave a comment:

  • Nded
    replied
    Re: IR support

    Originally posted by RobertHodge View Post
    Much to my amazement, I pulled the batteries on my MX-500 and there is indeed a 4 pin connector there (1 pin is blank).

    So are you saying that if I had the correct cable I could program my remote from my computer?

    Try a Google search on 'program jp1 remote'

    You can build your own JP1 compatible cable for a few bucks. You can buy one for under $10 (look on ebay and other discount sites).

    Leave a comment:

Previous 1 7 8 9 10 11 template Next
Working...
X